06 15 00.02 Thermally Modified Wood Decking (Spruce Wood)

06 15 00.02 Thermally Modified Wood Decking (Spruce Wood)


Specification Details

Pages

Dimensions

8.5" x 11"

Editable

Word Doc

Usage Limit

Unlimited Projects

Section

06 15 00.02

Provided by

Instant Download

This specification is available for Instant Download

https://zerodocs.com/wp-content/uploads/2021/02/06-15-00.02-Thermally-Modified-Wood-Decking-Spruce.docx Download Spec
06 15 00.02 Thermally Modified Wood Decking (Spruce Wood)

This guide specification section 06 15 00.02 Thermally Modified Wood Decking (Spruce Wood) has been prepared by ThermoryUSA for use in the preparation of a project specification section covering Thermory thermally modified Spruce wood for use as exterior decking, porch flooring, steps, and railings. Thermory decking can be used in exterior or interior locations and can be installed using hidden clips, PaCS press-and-click system, or visible fasteners, depending on the profile. All Thermory products are available unoiled or pre-oiled.

 

ThermoryUSA also provides guide specifications for the following Thermory thermally modified wood products:

 

06 20 00 – Thermally Modified Finish Carpentry.

 

07 46 23 – Thermally Modified Wood Cladding.

 

09 78 26 – Thermally Modified Wood Wall and Ceiling Cladding.

 

06 15 00.02 Thermally Modified Wood Decking (Spruce Wood)

 

 

 

 

 

 

 

 

06 15 00 – THERMALLY MODIFIED WOOD DECKING
PART 1 – GENERAL
  1. SUBMITTALS
    1. Action Submittals:
      1. Product Data: Manufacturer’s descriptive data and product attributes for wood materials.
      2. Samples: [Selection samples.] [Verification samples.]
    2. SYSTEM DESCRIPTION
      1. Design Requirements:
        1. Design and install [guard rails and handrails] to resist following without damage or permanent set:
          1. [50] [__] pounds per linear foot load applied in any direction at top, transferred via attachments and supports to building structure.
          2. Concentrated [200] [__] pound load applied in any direction at any point along top, transferred via attachments and supports to building structure.
          3. Maximum deflection under loading: [L/120.] [__.]
    3. QUALITY ASSURANCE
      1. Installer Qualifications: Firm specializing in work of this Section, with minimum [2] [__] years’ experience.
      2. Mockup: Minimum [__ x __] feet. Approved mockup [may] [may not] remain as part of the Work.
      3. Slip Resistance: Average dynamic coefficient of friction of 0.44, tested to ANSI A137.1/A326.3 in wet condition.
PART 2 – PRODUCTS
    1. MANUFACTURERS
      1. Contract Documents are based on products by ThermoryUSA, www.thermoryusa.com.
      2. Substitutions: [Refer to Division 01.] [Not permitted.]
    2. MATERIALS

Retain the following for 5/4 x 6 inch Kodiak Spruce decking installed with screws.

      1. Thermally Modified Wood Decking:
        1. Species: Kodiak Spruce.
        2. Nominal size: 5/4 x 6 inches.
        3. Actual size: 1.02 x 5.5 inches.
        4. Coverage: 5.5 inches.
        5. Profile: Square edges and ends.
        6. Color: Golden Brown.
        7. Surface texture: Wire brushed.
        8. Finish: [Unoiled.] [Pre-oiled with Cutek Extreme.]
        9. Installation type: Visible.
        10. Installation method: [Screws.] [Starborn Pro Plug System.]

**** OR ****

Retain the following for 5/4 x 6 inch Kodiak Spruce decking installed with hidden clips.

      1. Thermally Modified Wood Decking:
        1. Species: Kodiak Spruce
        2. Nominal size: 5/4 x 6 inches
        3. Actual size: 1.02 x 5.5 inches
        4. Coverage: 5.5 inches
        5. Profile: Square edges and ends
        6. Color: Golden Brown
        7. Surface texture: Wire brushed.
        8. Finish: [Unoiled.] [Pre-oiled with Cutek Extreme.]
        9. Installation type: PC clips.
        10. Installation method: Hidden fasteners.

**** OR ****

Retain the following for 5/4 x 8 inch Kodiak Spruce decking installed with screws.

      1. Thermally Modified Wood Decking:
        1. Species: Kodiak Spruce
        2. Nominal size: 5/4 x 8 inches
        3. Actual size: 1.02 x 7.3 inches
        4. Coverage: 7.3 inches
        5. Profile: Square edges and ends
        6. Color: Golden Brown
        7. Surface texture: Wire brushed
        8. Finish: [Unoiled.] [Pre-oiled with Cutek Extreme.]
        9. Installation type: Visible
        10. Installation method: [Screws.] [Starborn Pro Plug System.]

**** OR ****

Retain the following for 5/4 x 8 inch Kodiak Spruce decking installed with hidden clips.

      1. Thermally Modified Wood Decking:
        1. Species: Kodiak Spruce
        2. Nominal size: 5/4 x 8 inches
        3. Actual size: 1.02 x 7.3 inches
        4. Coverage: 7.3 inches
        5. Profile: Grooved edges, square ends
        6. Color: Golden Brown
        7. Surface texture: Wire brushed.
        8. Finish: [Unoiled.] [Pre-oiled with Cutek Extreme.]
        9. Installation type: Hidden
        10. Installation method: PC clips.

Retain the following for railings, handrails, and trim to match the decking.

    1. Thermally Modified Wood [Railings] [Handrails] [and] [Trim]: Same species, color, and finish as decking; square edge profile, sizes as indicated.
PART 3 – EXECUTION
  1. INSTALLATION
    1. Install in accordance with manufacturer’s instructions.
    2. Decking Installation Method: [Visible screws.] [Hidden clips.]
      1. [Railing] [Handrail] [Steps] [and] [Trim] Installation Method: Face screws.
      2. Place decking to span two or more supports.
      3. Stagger decking end joints in adjacent rows.
      4. Anchor decking to supports.
      5. Install [railings] [handrails] [steps] [and] [trim] using face screw method.

 

 

 

 

 

.


Industry Resources