06 15 00.03 Modified Wood Decking (Pine Wood)

06 15 00.03 Modified Wood Decking (Pine Wood)


Specification Details

Pages

Dimensions

8.5" x 11"

Editable

Word Doc

Usage Limit

Unlimited Projects

Section

06 15 00.03

Provided by

Instant Download

This specification is available for Instant Download

https://zerodocs.com/wp-content/uploads/2021/02/06-15-00.03-Thermally-Modified-Wood-Decking-Pine.docx Download Spec
06 15 00.03 Modified Wood Decking (Pine Wood)

Guide specification 06 15 00.03 Modified Wood Decking (Pine Wood) covering thermally modified Pinewood for use as exterior decking, porch flooring, steps, and railings.

 

Thermory decking can be used in exterior or interior locations and can be installed using hidden clips, PaCS press-and-click system, or visible fasteners, depending on the profile. All products are available unoiled or pre-oiled.

 

Visit ThermoryUSA specifications profile for the following:

06 15 00.o1 – Thermally Modified Wood Decking (Ash)

06 15 00.03  – Thermally Modified Wood Decking (Spruce)

06 20 00 – Thermally Modified Finish Carpentry.

07 46 23 – Thermally Modified Wood Cladding.

09 78 26 – Thermally Modified Wood Wall and Ceiling Cladding.

 

For assistance in the use of products in this section, contact Thermory USA by calling 585-250-4074 or visit their website at www.thermoryusa.com.

 

 

06 15 00.03 Modified Wood Decking (Pine Wood)

 

 

 

 

 

 

 

 

 

 

 

 

 

06 15 00 – THERMALLY MODIFIED WOOD DECKING
PART 1 – GENERAL

SUBMITTALS

  1. Action Submittals:
      1. Product Data: Manufacturer’s descriptive data and product attributes for wood materials.
      2. Samples: [Selection samples.] [Verification samples.]
    1. SYSTEM DESCRIPTION
      1. Design Requirements:
        1. Design and install [guard rails and handrails] to resist following without damage or permanent set:
          1. [50] [__] pounds per linear foot load applied in any direction at top, transferred via attachments and supports to building structure.
          2. Concentrated [200] [__] pound load applied in any direction at any point along top, transferred via attachments and supports to building structure.
          3. Maximum deflection under loading: [L/120.] [__.]
    2. QUALITY ASSURANCE
      1. Installer Qualifications: Firm specializing in work of this Section, with minimum [2] [__] years’ experience.
      2. Mockup: Minimum [__ x __] feet. Approved mockup [may] [may not] remain as part of the Work.
      3. Slip Resistance: Average dynamic coefficient of friction of 0.44, tested to ANSI A137.1/A326.3 in wet condition.
PART 2 – PRODUCTS

MANUFACTURERS

    1. Contract Documents are based on products by ThermoryUSA, www.thermoryusa.com.
    2. Substitutions: [Refer to Division 01.] [Not permitted.]

MATERIALS

Retain the following for 5/4 x 5 inch Scots Pine decking installed with screws.

      1. Thermally Modified Wood Decking:
        1. Species: Scots Pine.
        2. Nominal size: 5/4 x 5 inches.
        3. Actual size: 1.02 x 4.65 inches.
        4. Coverage: 4.65 inches.
        5. Profile: Square edges and ends.
        6. Color: Golden Brown.
        7. Surface texture: Smooth.
        8. Finish: [Unoiled.] [Pre-oiled with Cutek Extreme.]
        9. Installation type: Visible.
        10. Installation method: [Screws.] [Starborn Pro Plug System.]

**** OR ****

Retain the following for 5/4 x 6 inch Scots Pine decking installed with hidden clips.

      1. Thermally Modified Wood Decking:
        1. Species: Scots Pine.
        2. Nominal size: 5/4 x 6 inches.
        3. Actual size: 1.02 x 5.5 inches
        4. Coverage: 5.5 inches.
        5. Profile: Grooved edges, square ends.
        6. Color: Golden Brown.
        7. Surface texture: Smooth.
        8. Finish: [Unoiled.] [Pre-oiled with Cutek Extreme.]
        9. Installation type: Hidden.
        10. Installation method: [Hidden clips.] [PC clips.]

**** OR ****

Retain the following for 5/4 x 6 inch Scots Pine decking installed with screws.

      1. Thermally Modified Wood Decking:
        1. Species: Scots Pine.
        2. Nominal size: 5/4 x 6 inches.
        3. Actual size: 1.02 x 5.5 inches
        4. Coverage: 5.5 inches.
        5. Profile: Square edges and ends.
        6. Color: Golden Brown.
        7. Surface texture: Smooth.
        8. Finish: [Unoiled.] [Pre-oiled with Cutek Extreme.]
        9. Installation type: Visible.
        10. Installation method: [Screws.] [Starborn Pro Plug System.]

**** OR ****

Retain the following for 2 x 4 inch Scots Pine decking installed with hidden fasteners.

      1. Thermally Modified Wood Decking:
        1. Species: Scots Pine.
        2. Nominal size: 2 x 4 inches.
        3. Actual size: 1.65 x 3.5 inches.
        4. Coverage: 3.5 inches.
        5. Profile: Square edges and ends.
        6. Color: Golden Brown.
        7. Surface texture: Smooth.
        8. Finish: [Unoiled.] [Pre-oiled with Cutek Extreme.]
        9. Installation type: Installation type: [Hidden.] [Visible.]
        10. Installation method: [Screws.] [Eb-tye hidden biscuit fasteners.]

**** OR ****

Retain the following for 2 x 6 inch Scots Pine decking installed with hidden fasteners.

      1. Thermally Modified Wood Decking:
        1. Species: Scots Pine.
        2. Nominal size: 2 x 6 inches.
        3. Actual size: 1.65 x 5.5 inches.
        4. Coverage: 5.5 inches.
        5. Profile: Square edges and ends.
        6. Color: Golden Brown.
        7. Surface texture: Smooth.
        8. Finish: [Unoiled.] [Pre-oiled with Cutek Extreme.]
        9. Installation type: [Hidden.] [Visible.]
        10. Installation method: [Screws.] [Eb-tye hidden biscuit fasteners.]

Retain the following for railings, handrails, and trim to match the decking.

    1. Thermally Modified Wood [Railings] [Handrails] [and] [Trim]: Same species, color, and finish as decking; square edge profile, sizes as indicated.

**** OR ****

    1. PACS Press and Click System: Decking manufacturer’s standard.
    2. Fasteners: Type 305 stainless steel screws.
PART 3 – EXECUTION

INSTALLATION

  1. Install in accordance with manufacturer’s instructions.
  2. Decking Installation Method: [Visible screws.] [Hidden clips.]
  3. [Railing] [Handrail] [Steps] [and] [Trim] Installation Method: Face screws.
  4. Place decking to span two or more supports.
  5. Stagger decking end joints in adjacent rows.
  6. Anchor decking to supports.
  7. Install [railings] [handrails] [steps] [and] [trim] using face screw method.

 

 

.


Industry Resources