Slip Resistant Flooring Treatment

Easy to edit CSI 3 part Slip Resistant Flooring Treatment specification for design professionals to create a project requirement for improving foot traction on metal, wood, concrete, tile, and previously coated surfaces.

For assistance on the use of the products in this section, contact Wooster Products, Inc. by calling 800-321-4936, by tim@wooster-products.com, or visit their website a www.wooster-products.com.

Related SimpleSpecs™ master specification:

07 18 00 – Traffic Coatings 

MATERIALS

Retain the following paragraph for coating subject to pedestrian traffic.

TRAFFIC COATING:

1. 1. Description: Moderate traction and durability coating for interior and exterior pedestrian traffic.
   2. Coating type: Single component acrylic paint.
   3. Color: [Black.] [Gray.] [Yellow.]
   4. Coverage rate: 100 – 125 square feet per gallon.
   5. Curing time: 2 – 4 hours at 75 degrees F.
   6. VOC Content: Less than 100 grams per liter, tested to ASTM D2369.
   7. Traction: Aluminum oxide or zirconium grit.
   8. Dry coefficient of friction: 97 dry
   9. Wet coefficient of friction: 0.79 wet, ANSI B101.3

**** OR ****

Retain the following paragraph for coating subject to pedestrian or vehicular traffic.

TRAFFIC COATING:

1. Description: High traction and durability coating for interior and exterior pedestrian traffic.
2. Coating type: Two-component epoxy
3. Color: [Clear.] [Black.] [Gray.]
4. Solids content: 100 percent.
5. Coverage rate: 125 – 175 square feet per gallon.
6. Curing time: 18 – 24 hours at 75 degrees F.
7. Traction: Aluminum oxide or zirconium grit.
8. Dry coefficient of friction: 0.97.
9. Wet coefficient of friction: 0.80, tested to ANSI B101.3.

**** OR ****

Retain the following paragraph for coating subject to pedestrian or vehicular traffic.

TRAFFIC COATING:

1. Description: Trowel applied extreme traction and durability coating for interior and exterior pedestrian and vehicular traffic.
2. Coating type: Two-component epoxy
3. Color: [Black.] [Safety Yellow.] [Gray.] [Brown.]
4. VOC content: Less than 100 g/liter, tested to ASTM D2369.
5. Coverage rate: 25 – 35 square feet per gallon.
6. Curing time: 18 – 24 hours at 75 degrees F.
7. Traction: Aluminum oxide or zirconium grit.
8. Dry coefficient of friction: 0.92.
9. Wet coefficient of friction: 0.76, tested to ANSI B101.3.

ACCESSORIES

1. Joint Sealer: As recommended by coating manufacturer.