07 14 13 Hot Fluid-Applied Waterproofing

07 14 13 Hot Fluid-Applied Waterproofing


Specification Details

Pages

1

Dimensions

8.5" x 11"

Editable

Word Doc

Usage Limit

Unlimited Projects

Section

07 14 13

Provided by

Get Instant access

This specification is available for purchase in the following bundles:

Hot Fluid-Applied Waterproofing

Use this CSI 3 part SimpleSpecs™ master specification to specify hot fluid-applied waterproofing for use on below-grade walls and decks.

 

Hot fluid-applied waterproofing is a modified bituminous product that is applied by to concrete, masonry, or plywood substrates. This type of waterproofing cannot be left exposed to weather.

 

Since it is applied in fluid form this type of waterproofing forms a continuous, seamless barrier against water penetration.

 

Some systems are available for use in vegetated roofs. They must be used in conjunction with root barriers, drainage media, and special growing media. Consult with a manufacturer of these products to determine specific requirements.

 

This waterproofing requires a protection course to prevent damage during backfilling and placement of overlying construction. A drainage course applied over the waterproofing reduces hydrostatic pressure, thereby reducing the possibility of leaks. Some drainage boards can also act as the protection course.

 

Related SimpleSpecs™ master specifications:

07 13 13 – Bituminous Sheet Waterproofing

07 14 16 – Cold Fluid-Applied Waterproofing

07 16 16 – Crystalline Waterproofing

07 17 00 – Bentonite Waterproofing

 

 

Hot Fluid-Applied Waterproofing

 

 

 

       
The SimpleSpecs™ master specs concept
 
Adding More Words Does Not Make Specifications More Enforceable.    
Design professionals are accustomed to seeing lengthy project specifications, so why is SimpleSpecs™ so short?
 
Specifications have grown evermore wordy over the years for several reasons:
  1. The mistaken belief that specifications must be lengthy and legal-sounding to be enforceable.  In fact, quite the opposite is true.  Having shorter, easily understood specifications makes us less likely to have problems in the field.
  2. A belief that having lots of words protects us from a Contactor making mistakes.  There is no way to include enough statements to protect yourself from a bad contractor, regardless of the length of your specification.
  3. Our desire to be in control of the project by specifying means and methods instead of including simple, enforceable statements.
 
Easier to Edit

SimpleSpecs™ is written as a series of Microsoft word files that include statements that affect construction costs or overall quality and are far simpler to edit than other master specification systems.

Non-Proprietary

Each SimpleSpecs™ specification section is non-proprietary and includes three manufacturers that meet the specified reference standards, descriptive, or performance-based requirements. They are written to allow any listed manufacturers to provide the specified products.

 
Hidden Guide Text

Each SimpleSpecs™ specification section includes hidden text to inform and guide users in editing the specifications to suit project conditions.

 
Streamlined Editing

SimpleSpecs™ sections are edited using pre-defined options that are contained in [brackets] or by selecting optional text separated by "OR" statements. Paragraph and page numbering are included as automatic codes, eliminating the need to renumber when revisions are made manually.  Global changes to headers, footer, terms, font colors and phrases are easily updated using a third-party search and replace software, available through ZeroDocs.com.

.


Industry Resources