04 23 00 Glass Unit Masonry

04 23 00 Glass Unit Masonry


Specification Details

Pages

2

Dimensions

8.5" x 11"

Editable

Word Doc

Usage Limit

Unlimited Projects

Section

04 23 00

Provided by

Get Instant access

This specification is available for purchase in the following bundles:

Glass Unit Masonry

Use this CSI 3 part SimpleSpecs™ master specification to specify glass unit masonry in exterior or interior vertical assemblies.

 

The texture and color of the glass units can vary in order to provide a range of transparency. Patterns can be pressed into either the inner void or the outside surface of the glass when it is cooling in order to provide differing effects. Glazes or inserts may also be added in order to create a desired private or decorative effect.

 

Units can be used as wall blocks, skylights, and sidewalk lights.  Specialty blocks are available for bullet, vandal, and fire resistance.

 

Some hollow glass wall blocks are available in colored variants. These colored variants fall into two categories:

– The first type is manufactured with UV stable colored glass and can be used in the same locations as standard clear glass blocks.

– The second type utilizes a colored material (dye or transparent paint) which is injected into the hollow center of the blocks to form a permanent coating, enabling vibrant colors to be achieved which are not possible with colored glass. However, the colored coating may not be UV stable and can fade in bright sunshine over time, and may therefore not be suitable for all locations.

 

Bullet and vandal-resistant blocks are generally solid glass or have very thick sidewalls.

 

Standard production hollow wall block will offer little fire resistance, but resistance is improved by utilizing specially produced hollow blocks with thicker sidewalls, or the inclusion of a special layer of fire-resisting material between the two halves of the block during manufacturing.

 

Glass wall blocks are fixed together to form complete walls by several methods – the most common method of construction is to bed the blocks together in a masonry mortaring with reinforcing rods of steel placed within the mortar as recommended by the project architect or block manufacturer.

 

A recent innovation in the manufacture of glass blocks is the inclusion of argon gas within the hollow center of glass wall blocks. This advancement in production technique has resulted in a glass block that is able to offer significantly improved thermal insulation properties.

 

Several manufacturers offer glass unit masonry floors and preassembled glass masonry wall panels. These products are not included in this section but can be added.

 

To learn more about glass blocks, visit Wikipedia. 

 

Related SimpleSpecs™ master specification:

04 05 13 – Masonry Mortaring 

07 92 00 – Joint Sealers

 

 

Glass Unit Masonry

 

Glass Unit Masonry 2

 

Glass Unit Masonry3

       
The SimpleSpecs™ master specs concept
 
Adding More Words Does Not Make Specifications More Enforceable.    
Design professionals are accustomed to seeing lengthy project specifications, so why is SimpleSpecs™ so short?
 
Specifications have grown evermore wordy over the years for several reasons:
  1. The mistaken belief that specifications must be lengthy and legal-sounding to be enforceable.  In fact, quite the opposite is true.  Having shorter, easily understood specifications makes us less likely to have problems in the field.
  2. A belief that having lots of words protects us from a Contactor making mistakes.  There is no way to include enough statements to protect yourself from a bad contractor, regardless of the length of your specification.
  3. Our desire to be in control of the project by specifying means and methods instead of including simple, enforceable statements.
 
Easier to Edit

SimpleSpecs™ is written as a series of Microsoft word files that include statements that affect construction costs or overall quality and are far simpler to edit than other master specification systems.

Non-Proprietary

Each SimpleSpecs™ specification section is non-proprietary and includes three manufacturers that meet the specified reference standards, descriptive, or performance-based requirements. They are written to allow any listed manufacturers to provide the specified products.

 
Hidden Guide Text

Each SimpleSpecs™ specification section includes hidden text to inform and guide users in editing the specifications to suit project conditions.

 
Streamlined Editing

SimpleSpecs™ sections are edited using pre-defined options that are contained in [brackets] or by selecting optional text separated by "OR" statements. Paragraph and page numbering are included as automatic codes, eliminating the need to renumber when revisions are made manually.  Global changes to headers, footer, terms, font colors and phrases are easily updated using a third-party search and replace software, available through ZeroDocs.com.

.


Industry Resources