Veneer Plastering

ZeroDocs
256

Specification Details

Pages
2
Dimensions
8.5" x 11"
Editable
Word Docx
Usage Limit
Unlimited Projects
Section
09 26 00
Provided By
ZeroDocs

Path Get Instant access

This specification is available for purchase in the following bundles:

Comprehensive SpecsInteriors SpecsArchitectural Specs

Utilize this section to specify gypsum veneer plastering of interior wall and ceiling finishes.

Gypsum veneer plaster for interior wall and ceiling finishes consists of a gypsum panel base and gypsum veneer plaster finish. This plaster is not suitable for exterior use.

Gypsum veneer plaster provides a durable, smooth, sound- and fire-resistant surface to receive paints or other coatings. Since the base is a prefabricated panel, installation time is less than with traditional multi-coat plasters.

It is typically finished with a smooth troweled surface.

Corner beads are required to prevent damage to external corners.

Casing beads are placed where plaster abuts dissimilar materials or stops with the edge exposed.

Control joints must be installed to minimize cracking. In general control joints should be placed:

  • 50 feet on center maximum at ceilings and where ceiling framing changes direction.
  • 30 feet on center maximum at walls and partitions and at changes in backup construction.
  • Above jambs in openings in walls and partitions.

To learn more about plastering, visit Wikipedia.

Related Section:

09 23 00 – Gypsum Plastering

09 24 00 – Portland Cement Plastering

Industry Resources
4 specs