Use this CSI 3-part SimpleSpecs™ master specification to specify resilient stair treads and risers on construction projects.
The section includes stair treads and raisers fabricated from rubber or vinyl and installed on concrete, steel, and wood stairs.
Installation improves the aesthetics of a stair system and reduces noise from foot traffic, particularly on steel stairs, and increases slip resistance.
USAB & ADA compliance
According to the United States Access Board, stair treads in buildings shall have uniform tread depths that are 11 inches, or 280 mm, at minimum. Treads are not permitted to have a slope steeper than 1:48.
All stair tread installations must comply with Regulation 302 of the ADA Standards for Accessible Design. The regulation states that the surface of the [tread] must be firm, stable, and slip-resistant.
Learning Information:
Visit Wikipedia to learn more about stair treads.
2010 ADA Standards for Accessible Design
Specified Manufacturers:
Related SimpleSpecs™ master specifications:
09 65 16 – Resilient Sheet Flooring
09 65 19 – Resilient Tile Flooring